DTC B1145: Front Passenger's Power Window Position Detect Circuit Error

NOTE:

If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
Make sure you reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT ) whenever you replace or substitute any power window parts.

Clear the DTC with the HDS.
Turn the ignition switch to LOCK (0), and then back to ON (II).
Open and close the front passenger's power window by using the front passenger's switch manually.
Check for DTCs with the HDS.
Are DTCs B1130 or B1131 indicated?

YES -Troubleshoot the DTC B1130 or B1131 (see DTC B1130: FRONT PASSENGER'S POWER WINDOW MOTOR A PULSE MALFUNCTION; DTC B1131: FRONT PASSENGER'S POWER WINDOW MOTOR B PULSE MALFUNCTION ).

NO -Go to step 5.
Reset the power window control unit and the front passenger's power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT ).
Check for DTCs again with the HDS.
Is DTC B1145 indicated?

YES -Go to step 7.

NO -The system is recovered at this time.
Substitute a known-good passenger's power window switch.
Open and close the front passenger's power window by using the front passenger's switch manually.
Check for DTCs with the HDS.
Is DTC B1145 indicated?

YES -Faulty front passenger's window motor; replace it.

NO -Faulty front passenger's power window switch; replace the front passenger's power window switch, 4-door (see 2-DOOR ), 2-door (see 2-DOOR ).