LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Ridgeline RT >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless/Power Door Locks/Security System >> Symptom Troubleshooting

Symptom Troubleshooting

  1. Troubleshoot the keyless/power door locks/security alarm system by the symptom index.
    SYMPTOM TROUBLESHOOTING CHART

    Symptom Location Possible cause
    The door(s) will not lock or unlock.
    1. Check for B-CAN troubleshooting test mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
    2. Do the control unit input test (see CONTROL UNIT INPUT TEST  ).
    3. Do the transmitter test (see TRANSMITTER TEST  ).
    4. Do the transmitter registration (see REGISTRATION FOR IMMOBILIZER SYSTEM ).
    5. Do the ignition switch test (see TEST ).
    6. Do the ignition key switch test (see IGNITION KEY SWITCH TEST ).
    NOTE: If the key in the ignition key switch or the ignition is ON (II), the door lock system does not function.
    The door(s) will not lock.
    1. Do the control unit input test (see CONTROL UNIT INPUT TEST  ).
    2. Do the door lock knob switch test (see DOOR LOCK KNOB SWITCH TEST  ).
    Door switch test (Door open: switch closed. Door closed: switch open).
    The door(s) will not unlock.
    1. Do the control unit input test (see CONTROL UNIT INPUT TEST  ).
    2. Do the door lock knob switch test (see DOOR LOCK KNOB SWITCH TEST  ).
    Door switch test (Door open: switch closed. Door closed: switch open).
    Transmitter will not program.
    1. Check for B-CAN troubleshooting test mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
    2. Do the control unit input test (see CONTROL UNIT INPUT TEST  ).
    3. Do the transmitter test (see TRANSMITTER TEST  ).
    4. Do the ignition switch test (see TEST ).
     
    Door(s) will relock even if the door is opened once after locking with remote.   Driver's door switch test (Door open: switch closed, Door closed: switch opened).
    Door(s) will lock and unlock with the remote even if the ignition switch is ON (II). Do the ignition switch test (see TEST ).
    NOTE: If the ignition switch ON (II), the door lock system does not function.
    Door will lock or unlock with the remote even if the ignition switch is ON (II). Do the ignition key switch test (see IGNITION KEY SWITCH TEST ).
    NOTE: If the key is in the ignition key switch, the door lock system does not function.
    Sometimes door(s) will not lock or unlock.
    1. Do the key cylinder test (see DOOR KEY CYLINDER SWITCH TEST  ).
    2. Do the in-bed trunk lid latch switch test (see CARGO AREA LIGHT REPLACEMENT ).
    Door switch test (Door open: switch closed, Door closed: switch open).