LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Fit Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Drive Plate Removal and Installation

Drive Plate Removal and Installation

  1. Remove the transmission assembly (see TRANSMISSION REMOVAL ).
  2. Remove the drive plate (A) and the washer (B) from the engine crankshaft.
    Fig 1: Drive Plate And Washer With Washer With Torque Specification
    G05455378
  3. Install the drive plate and the washer on the engine crankshaft, and tighten the six bolts in a crisscross pattern in at least two steps.
  4. Install the transmission assembly (see TRANSMISSION INSTALLATION ).
scientia non olet · About LEMON Manuals