LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon AT4 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance Systems >> Repair Instructions >> Side Obstacle Detection Control Module Replacement >> Installation Procedure

Installation Procedure

  1. GM5567759Courtesy of GENERAL MOTORS COMPANY

    Side Object Sensing Alert Module (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Side Object Sensing Alert Module Bolt (1) - Install and tighten - Fastener Specifications 
  3. Connect the electrical connector.
  4. Perform the necessary programming and setup procedure: - Control Module References
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals