LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1995 >> Yukon 4D Utility >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 5.7L. >> Fuel System >> Governor Assembly (TBI 295) >> Removal & Installation

Removal & Installation

  1. Remove air cleaner assembly, extension (spacer) and gasket. Disconnect electrical harness connector from governor assembly. Rotate the throttle cam lever to 11 o'clock position. Install a 14 mm socket between governor drive motor and throttle cam lever to block throttle cam lever. See Figure.
  2. Remove mounting screws. Hold throttle valve closed. Remove governor assembly. See Figure.
  3. To install, make sure throttle cam lever is blocked open (11 o'clock position). Install governor assembly. See Figure. Remove 14 mm socket. Ensure throttle cam lever and throttle valves rotate freely. To complete installation, install remaining parts.
scientia non olet · About LEMON Manuals