Roof Opening Panel: Notes
WARNING: This page is about a different car, the 2015 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
Roof Opening Panel
The roof opening panel motor/module must be initialized when repairs are carried out on any part of the roof opening panel system or when the roof opening panel motor, glass, assembly, or air deflector has been removed or replaced for any reason.
Symptom Charts
Symptom Chart: Operation
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods
| Condition | Possible Sources | Actions |
|---|---|---|
| The roof opening panel leaks | Refer to the Pinpoint Test | GO to Pinpoint Test B |
| The roof opening panel does not open or close | Refer to the Pinpoint Test | GO to Pinpoint Test E |
| The one touch feature is inoperative | Roof opening panel motor not initialized Roof opening panel motor |
INITIALIZE the roof opening panel module. REFER to: Power Roof Opening Panel Initialization If the concern is still present after initialization, replace the motor. REFER to: Roof Opening Panel Motor |
| The roof opening panel does not seat in flush position from any position | Incorrect roof opening panel adjustment | REFER to: Roof Opening Panel Alignment |
Symptom Chart: NVH
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods
| Condition | Possible Sources | Actions |
|---|---|---|
| The roof opening panel has excessive wind noise | Refer to the Pinpoint Test | GO to Pinpoint Test A |
| The roof opening panel rattles | Refer to the Pinpoint Test | GO to Pinpoint Test C |
| Roof opening panel is noisy during operation | Refer to the Pinpoint Test | GO to Pinpoint Test D |