LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2010 >> Crown Victoria Base, 4.6 W >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Automatic Transaxle/Transmission - External Controls >> Diagnosis And Testing >> External Controls >> Symptom Chart - External Controls

Symptom Chart - External Controls

SYMPTOM CHART - EXTERNAL CONTROLS

Condition Possible Sources Action
  • The Brake Shift Interlock Actuator (BSIA) system does not release/lock correctly
  • Circuitry
  • Fuse(s):
    • 14 (20A)
    • 28 (7.5A)
  • BSIA 
  • Brake Pedal Position (BPP) switch
  • Lighting Control Module (LCM)
  • ABS module
  • PCM
  • Vehicle will not crank/start in park but will crank/start in neutral
  • Selector lever cable
  • Transmission Range (TR) sensor
  • Selector lever cable adjustment
  • The selector lever is out of correct gear relationship
  • Selector lever component(s)
  • Internal transmission component(s)
  • The selector lever indicator does not correspond to the gear
  • Selector lever cable adjustment
  • The selector lever is binding
  • Selector lever component(s)
  • Internal transmission component(s)
  • The selector lever will not shift through the ranges
  • Shift control component(s)
  • Internal transmission component(s)
  • The selector lever indicator does not illuminate
  • Instrument Cluster (IC)
  • The Transmission Control Switch (TCS) does not operate correctly
  • TCS  not cycled during self-test
  • Fuse 26 (10A)
  • TCS 
  • Circuitry
  • PCM
  • IC 
  • The Transmission Control Indicator Lamp (TCIL) does not illuminate
  • Circuitry
  • IC 
  • PCM
  • The TCIL  is illuminated continuously
  • Circuitry
  • IC 
  • PCM
  • Water enters inside the vehicle
  • Selector lever cable rubber grommet
  • SECURE the grommet to the bulkhead.
  • Torn selector lever cable rubber grommet