System Tests: Notes
NOTE:
A New Generation Star (NGS) tester or other OBD-II compliant scan tool is required to perform system tests. After each service or repair procedure has been completed, reconnect all components and clear DTCs. See WIRING DIAGRAMS
for circuit identification. Recheck system operation.
NOTE:
Door lock unit may also be referred to as door lock actuator.
SYMPTOM INDEX
| Symptom | Perform Test |
|---|---|
| No Communication With Generic Electronic Module | A |
| All Door Locks Inoperative | B |
| All Door Locks Inoperative From One Switch | C |
| All Door Locks Inoperative From A Single Lock Cylinder Switch | D |
| A Single Door Lock Inoperative - Passenger Door | E |
| A Single Door Lock Inoperative - Driver Door | F |
| Door Locks Operate One Way Only | G |
| Doors Do Not Lock/Unlock Using Remote Transmitter | H |
| Keyless Entry Remote Transmitter Out Of Synchronization | I |
| Panic Feature Does Not Operate Properly; Unlock/Lock Operate Properly | J |