Rear Engine
WARNING: This page is about a different car, the 2019 Fiat 500X. However, it is still accessible from the selected car via links, so may be relevant.
REAR ENGINE - TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Flexplate to Crankshaft M9 Bolts | (Step 1) 15 |
(Step 1) 11 |
- | Do not reuse these fasteners. If removed, a NEW
fastener must be installed and tightened to specifications. Tighten in sequence Refer to FLEXPLATE, INSTALLATION . |
| (Step 2) 20 + 42° |
(Step 2) 15 + 42° |
- | ||
| Transmission to Engine Dust Shield M10 Bolts | 40 | 30 | - | |
| Transmission to Engine M12 Bolts | 60 | 44 | - | |
| Starter Motor M10 Bolts | 40 | 30 | - | |
| Starter Motor Battery Positive Cable M8 Nut | 9 | - | 80 | |
| Wiring Mounting Bracket M8 Bolts | 26 | 19 | - | |
| PTU to Transmission M10 Bolts | 55 | 41 | - | |
| PTU Support Bracket M8 Bolts | 34 | 25 | - | |
| PTU Support Bracket M10 Bolts | 56 | 41 | - |