Front Engine
WARNING: This page is about a different car, the 2019 Fiat 500X. However, it is still accessible from the selected car via links, so may be relevant.
FRONT ENGINE - TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Timing Cover to Crankcase and Cylinder Head M6 Bolts | (Step 1) 5 |
- | (Step 1) 44 |
Do not reuse these fasteners. If removed, a NEW
fastener must be installed and tightened to specifications. Tighten in sequence Refer to COVER(S), ENGINE TIMING, INSTALLATION . |
| (Step 2) 9 |
- | (Step 2) 80 |
||
| Timing Cover to Cylinder Head M10 Bolts | (Step 1) 25 |
(Step 1) 18 |
- | |
| (Step 2) 51 |
(Step 2) 38 |
- | ||
| Water Pump Drive Sprocket M8 Bolt | 20 | 15 | - | |
| Timing Chain Guide (Long and Short) M6 Bolts | 9 | - | 80 | |
| Timing Chain Tensioner Arm M8 Bolt | 20 | 15 | - | |
| Vibration Damper M12 Bolt | 20 + 170° | 15 + 170° | - |