Diagnostic Test
- CHECK FOR PRESENCE OF PASSIVE ENTRY NODE ERRORS
- Check for presence of Passive Entry node errors.
Are errors present?
Yes
- Check that passive Entry node diagnosis is solved, then go to step 2.
No
- Go to step 2.
- Check for presence of Passive Entry node errors.
- CHECK THAT THE ELECTRIC POWER STEERING (EPS) MODULE IS WORKING PROPERLY
- Connect the diagnosis equipment and carry out the Electric Power Steering (EPS) Module error deletion procedure.
- Check if the error is still present.
Is the error still present?
Yes
- Repeat the checks from Step 1.
- Replace the Electric Power Steering (EPS) Module in accordance with the Service Information. Refer to GEAR, REMOVAL AND INSTALLATION .
No
- End of diagnosis.