LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1997 >> Talon TSi, AWD, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - Turbo >> Ignition System >> Camshaft Position Sensor >> Removal & Installation

Removal & Installation

  1. Camshaft position sensor is located at rear of cylinder head on intake manifold side of engine. See Fig 1. Disconnect connector from camshaft position sensor. Remove bolt, camshaft position sensor and "O" ring.
  2. To install, reverse removal procedure using NEW "O" ring. Install and tighten camshaft position sensor bolt to specification. See TORQUE SPECIFICATIONS .
Fig 1: Locating Camshaft Position Sensor
G96J29453Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals