Diagnostic Test

WARNING: This page is about a different car, the 2009 Dodge Durango and 2009 Chrysler Aspen. However, it is still accessible from the selected car via links, so may be relevant.

KEY NOT PROGRAMMED
1. Turn the ignition on.
2. Using a scan tool, attempt to program the key(s) into the WCM.
  Was the programming of the key(s) successful?
  
  Yes
  - Programming of the key(s) was successful. Test complete.
  - Perform the WIRELESS CONTROL MODULE (WCM) VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Wireless Control (WCM) - Standard Procedure .
  No
  - Replace the ignition key and attempt to program it into the WCM. If the DTC resets, replace and program the Wireless Control Module in accordance with the Service Information.
    NOTE: If this vehicle is equipped with a Steering Column Lock Module, it must be replaced along with the WCM.
  - Perform the WIRELESS CONTROL MODULE (WCM) VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Wireless Control (WCM) - Standard Procedure .