LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Transmission >> Clutch >> Pilot Bearing >> Installation

Pilot Bearing: Installation

  1. Lubricate new bearing with Mopar®high temperature bearing grease or equivalent.
  2. Start new bearing into crankshaft by hand, then seat bearing with clutch alignment tool.
  3. Lightly scuff sand flywheel surface with 180 grit emery cloth. Then clean surface with wax and grease remover.
  4. Install clutch disc and clutch cover (Refer to CLUTCH/CLUTCH DISC - INSTALLATION) .
  5. Install the transmission (Refer to TRANSMISSION/TRANSAXLE/MANUAL - INSTALLATION) .
scientia non olet · About LEMON Manuals