LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Mechanical Brake System - Base (Service Information)) >> Support Plate >> Installation >> Installation - Rear

Installation - Rear

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the brake support plate with the axle bearing onto the axle shaft (Refer to DIFFERENTIAL & DRIVELINE/REAR AXLE/AXLE BEARINGS - INSTALLATION) .
  2. Install the park brake cable to the support plate.
  3. Install the rear park brake shoes (Refer to BRAKES/PARKING BRAKE/SHOES - INSTALLATION) .
  4. Install the disc brake rotor (Refer to BRAKES/HYDRAULIC/MECHANICAL/ROTORS - INSTALLATION) .
  5. Install the disc brake caliper adapter (Refer to BRAKES/HYDRAULIC/MECHANICAL/DISC BRAKE CALIPER ADAPTER - INSTALLATION) .
  6. Adjust the rear park brake shoes (Refer to BRAKES/PARKING BRAKE/SHOES - ADJUSTMENTS) .
  7. Install the rear wheels (Refer to TIRES/WHEELS/WHEELS - INSTALLATION) .
scientia non olet · About LEMON Manuals