LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Fuel Delivery - Gas Engine) >> Fuel Level Sending Unit / Sensor >> Installation

Fuel Level Sending Unit / Sensor: Installation

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect necessary wiring into electrical connectors. Connect 4-wire electrical connector to pump module.
  2. Position sending unit to pump module. Slide and snap into place.
  3. Install fuel pump module. Refer to REMOVAL /INSTALLATION .
scientia non olet · About LEMON Manuals