LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Right Multi-Function Switch >> Removal

Right Multi-Function Switch: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Wait two minutes for the airbag system reserve capacitor to discharge before beginning any steering column service.
  3. Remove the upper and lower steering column shrouds (Figure)(Refer to SHROUD - LOWER ) and (Refer to SHROUD - UPPER ).
  4. Disconnect the instrument panel wire harness connector for the right multi-function switch.
  5. Remove the two screws that secure the right multi-function switch to the multi-function switch mounting housing (Figure).
  6. Remove the right multi-function switch from the multi-function switch mounting housing.
scientia non olet · About LEMON Manuals