LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Steering Column Switches) >> System Tests >> Horn Circuit

Horn Circuit

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, 2003 Chrysler 300M, and 2002 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect horn connector. Connect voltmeter between ground and Dark Green/Red wire at horn connector. Depress horn switch. Repeat for other horn. If battery voltage does not exist, check horn relay circuit. See HORN RELAY CIRCUIT  . If battery voltage exists, go to next step.
  2. Check continuity between ground and Black wire terminal at horn connector. Repeat for other horn. If continuity exists, replace appropriate horn. If continuity does not exist, repair open in appropriate Black wire.
scientia non olet · About LEMON Manuals