Installation Procedure
Rear Window (1) - Install - adhesive Installation Of Rear Windows
- Connect The Rear Window Grid Electrical Connectors.
Rear End Spoiler (1) - Install
If New Threaded Components Are Being Installed, Loosen The Adhesive Using A Metal Pick Or Similar Tool Before Proceeding. If Threaded Components Are Reused, Prepare The Threaded Components Using The Following Steps:
- Remove Any Loose Cured Adhesive From The External Threads Of The Components Using A Lint Free Cloth.
- Thread The Cleaned Components Into The Internal Mating Threads And Remove To Loosen Trapped Cured Adhesive.
- Remove Loose Debris From Internal And External Threads Using Compressed Air.
- Apply Liquid Thread Locking Adhesive In A Strip Along Half Of The Length Of The External Threads, Starting At The Tip, Just Prior To Installation. Adhesives, Fluids, Lubricants, And Sealers
- Rear End Spoiler Bolt (3) - Install And Tighten [6X] - Fastener Specifications
- Rear End Spoiler Nut (2) - Install And Tighten [6X] - Fastener Specifications
- Connect The Electrical Connectors.
- Rear Window Washer Nozzle Hose (1) - Connect
Liftgate Upper Side Trim Finish Panel - Left Side And Right Side (1) - Install [2X]
Liftgate Upper Center Trim Finish Panel (1) - Install
Rear Window Wiper Motor Grommet - Install
- Connect All Electrical Connectors.
- Rear Window Wiper Motor (2) - Install
- Rear Window Wiper Motor Bolt (1) - Install And Tighten [3X] - Fastener Specifications
Rear Window Wiper Arm (1) - Install
Rear Window Wiper Arm Nut (1) - Install And Tighten - Fastener Specifications
Rear Window Wiper Arm Finish Cap (1) - Install
Rear Window Wiper Blade (1) - Install
Connect The Electrical Connector.
- Liftgate Lower Trim Finish Panel (3) - Install
- Liftgate Lower Trim Finish Panel Bolt (2) - Install And Tighten - Fastener Specifications
- Liftgate Lower Trim Finish Panel Access Hole Cover (1) - Install
- Battery Negative Cable - Connect - Battery Negative Cable Disconnection And Connection
- Liftgate - Close
CAUTION:
Refer To Fastener Caution .