Installation Procedure
WARNING: This page is about a different car, the 2024 Chevrolet Silverado EV. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
Ensure the retaining tabs are properly aligned.
Side Obstacle Detection Control Module (2) - Install
- Short Range Radar Sensor Bolt (1) - Install and tighten [2x] - Fastener Specifications
- Connect the electrical connector.
With the aid of an assistant, install the fascia. (1) - Rear Bumper Fascia Removal and Installation
- Perform the necessary programming and setup procedure:Control Module References
CAUTION:
Refer to Fastener Caution .