Installation Procedure
- With the aid of an assistant, load the instrument panel (1) to the instrument panel tie bar to the locator pins.
- Reposition the instrument panel wiring harness into the vehicle position as was noted in the removal and connect the fasteners securing the instrument panel wiring harness to the instrument carrier.
- Install Instrument Panel Bolt(1) and tighten 2.5 N.m (22 lb in)
- Install Radio Front Speaker Replacement (2)
- Install Radio Front Speaker Grille Replacement (1)
- Install Radio Front Center Speaker Replacement (3)
- Radio Front Center Speaker Grille Replacement (1)
- Install the steering column (1). Refer to Steering Column Replacement .
- Install Instrument Panel Airbag Bolt (1) and tighten 9 N.m (80 lb in)
- Connect the instrument panel airbag electrical connector.
- { If equipped } Install Forward Collision Alert Display Replacement (3)
- Install Instrument Cluster Replacement (3)
- Install Radio Control Assembly Replacement (IO5 or IO6) (2)
- Install Instrument Panel Lower Airbag Replacement - Driver Side (2)
- Install Heater and Air Conditioning Control Replacement (1)
- Install Instrument Panel Center Air Outlet Replacement (1)
- Install Instrument Panel Knee Bolster Replacement (2)
- Connect the headlamp switch electrical connector.
- Install Instrument Panel Knee Bolster Compartment Replacement (2)
- Install Steering Column Lower Trim Cover Replacement (2)
- Install Steering Column Upper Trim Cover Replacement (1)
- Install Instrument Panel Cluster Trim Plate Replacement (2)
- Install Instrument Panel Trim Pad Replacement - Left Side (2)
- Install Instrument Panel Outer Trim Cover Replacement - Left Side (2)
- Install Front Floor Console Replacement (Base) Front Floor Console Replacement (Up Level) (2) - Install
- Install Instrument Panel Compartment Replacement (2) - Install
- Install Instrument Panel Fuse Block Access Cover Frame Replacement (1) - Install
- Install Instrument Panel Fuse Block Access Hole Cover Replacement (1) - Install
- Install Front Floor Console Extension Panel Replacement (2)
- Install Instrument Panel Center Trim Pad Replacement (1)
- Install Instrument Panel Trim Pad Replacement - Right Side (2)
- Install Instrument Panel Outer Trim Cover Replacement - Right Side (2)
- Install Windshield Garnish Molding Replacement (3)
- Enable the SIR System. SIR Disabling and Enabling
CAUTION: