Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
- Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
- Remove Front Compartment Air Deflector. Refer to Front Compartment Air Deflector Replacement
- Loosen Steering Knuckle Nut (1) @ Front Lower Control Arm
Use the J-42188-2A 6 mm Hex Key to prevent the ball joint pivot from being rotated.
- Use the CH-42188-B ball joint separator to separate the front lower control arm from the steering knuckle.
- Remove Steering Knuckle Nut (1) @ Front Lower Control Arm
- Remove Front Lower Control Arm Front Bolts (1) (Qty: 2)
- Remove Front Lower Control Arm Front Brackets (2) (Qty: 2)
- Remove Front Lower Control Arm Rear Nuts (1) (Qty: 2)
- Remove Front Lower Control Arm Rear Bolts (2) (Qty: 2)
- Remove Front Lower Control Arm (1) @ Vehicle