Installation Procedure
- Install Front Lower Control Arm (1) @ Vehicle
- Install Front Lower Control Arm Rear Bolts (2) (Qty: 2)
- Install and tighten Front Lower Control Arm Rear Nuts (1) (Qty: 2) to 100 N.m (74 lb ft)
- Install Front Lower Control Arm Front Brackets (2) (Qty: 2)
- Install and tighten Front Lower Control Arm Front Bolts (1) (Qty: 2) to 120 N.m (89 lb ft)
- Install and tighten Steering Knuckle Nut (1) @ Front Lower Control Arm
Use the J-42188-2A 6 mm Hex Key to prevent the ball joint pivot from being rotated.
- First Pass: 30 N.m (22 lb ft)
- Final Pass: 120 - 135 Degrees
- Install Front Compartment Air Deflector. Refer to Front Compartment Air Deflector Replacement
- Install the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution