Installation Procedure
- Position the front door window channel front channel into the front door.
- Install the front door window channel screws.
Tighten
Tighten the front door window channel screws to 10 N.m (89 lb in).
- Install the front door window channel to the front door starting in the top corner working out in both directions.
Firmly seat the front door window channel to the front door.
- Install the front door rear window channel to the front door through the access hole in the inner front door panel.
- Install the front door rear window channel to the front door slot by pushing up to engage the retainer clip.
- Install the screw to the front door rear window channel.
Tighten
Tighten the front door weatherstrip channel screws to 10 N.m (89 lb in).
- Install the front door window. Refer to Front Side Door Window Replacement .
- Inspect the front door window for proper operation.
- Install the front door outer belt sealing strip. Refer to Front Side Door Window Belt Outer Sealing Strip Replacement (Impala) .
- Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement (Impala) .
- Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
CAUTION:
Refer to Fastener Caution .