Ignition Lock Cylinder Replacement
Courtesy of GENERAL MOTORS COMPANY Ignition Lock Cylinder Replacement
| Callout |
Component Name |
|
Preliminary Procedures
- Remove the steering column upper trim cover. Refer to Steering Column Upper Trim Cover Replacement
.
- Remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement
.
|
| 1 |
Ignition Lock Cylinder Procedure
- Turn the ignition lock cylinder to the RUN position.
- Insert a pick-type tool into the proper hole on the ignition lock cylinder case and press the lock tab on the ignition lock cylinder down.
- Pull the ignition lock cylinder out of the ignition lock cylinder case.
- If installing a new ignition lock cylinder then refer to Key and Lock Cylinder Coding
.
|