Removal Procedure

Fig 1: Cruise Control Cable End

Courtesy of GENERAL MOTORS CORP.

Remove the air cleaner assembly. Refer to the following procedures:
- Air Cleaner Assembly Replacement in Engine Controls - 4.3L.
- Air Cleaner Assembly Replacement in Engine Controls - 4.8L, 5.3L, and 6.0L.
Remove the cruise control cable end from the throttle linkage. Use a suitable tool to lightly pry off the end of the cruise control cable end from the throttle linkage.

Fig 2: Removing Cruise Control Cable End From Throttle Linkage

Courtesy of GENERAL MOTORS CORP.

Disconnect the cruise control cable from the cable bracket by squeezing the retaining tabs on the cable.

Fig 3: Disconnecting Cruise Control Cable From Cable Bracket

Courtesy of GENERAL MOTORS CORP.

Disconnect the cruise cable from the retaining clip on the fan shroud.
Squeeze the retaining tabs on the cruise control cable fitting to expose the cable bead and the buckle of the ribbon.

IMPORTANT: Do not allow the cruise control ribbon to retract into the module assembly.

Fig 4: Disconnecting Cruise Control Cable From Cruise Control Module

Courtesy of GENERAL MOTORS CORP.

Disconnect the cruise control cable bead from the buckle on the end of the ribbon.
Remove the cruise control cable from the vehicle.