LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Suspension >> Front Suspension >> Removal & Installation >> Transverse Spring >> Installation

Transverse Spring: Installation

  1. If spring was replaced, install spring adjuster bolts to measurement taken during removal. Install spring. Compress spring. Install spring retainers.
  2. Install lower control arms, aligning marks on cams. Ensure cotter pin holes in lower ball joint studs are facing vehicle front and rear. Rotate studs with padded pliers, if necessary. DO NOT damage taper or threads. Engage studs into holes in steering knuckles. Install stud nuts. Tighten stud nuts to specification. See TORQUE SPECIFICATIONS . Install NEW cotter pins from rear toward front of vehicle.
  3. Install shock absorbers. Connect stabilizer bar links. Remove spring compressor. Connect wheel speed sensor connector and install harness bracket. Remove jackstands below lower control arms. Install wheels. Lower vehicle. Adjust trim height. See TRIM HEIGHT ADJUSTMENT  under ADJUSTMENTS.
scientia non olet · About LEMON Manuals