LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Suspension >> Front Suspension >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Ball Joint Stud Nut (1)
Lower
Step 1 15 (20)
Step 2 Additional 210 degrees
Step 3 52 (70)
Upper
Step 1 15 (20)
Step 2 Additional 250 degrees
Step 3 41 (55)
Crossmember Mount Nut 81 (110)
Hub & Bearing Assembly Nut 96 (130)
Lower Control Arm Mounting Bolt (2) 125 (170)
Shock Absorber Bolt
Lower 21 (28)
Upper 19 (26)
Spring Retainer Bolt (2) 46 (62)
Stabilizer Bar
Insulator Bracket Bolt (At Frame) (2) 43 (55)
Link Nut (2) 53 (72)
Tie Rod Jam Nut 44 (60)
Tie Rod-To-Steering Knuckle Nut (1)
Step 1 15 (20)
Step 2 Additional 160 degrees
Step 3 33 (45)
Upper Control Arm-To-Frame Nut 48 (65)
Wheel Lug Nut 100 (136)
(1) After tightening nut to specification, tighten nut further but only as far as necessary to align cotter pin holes. DO NOT loosen nut to align holes. Install cotter pin from rear toward front of vehicle.
(2) Tighten with vehicle at proper trim height.