LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Metro Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment Specifications & Adjustment Procedures >> Ride Height Adjustment >> Checking Procedure >> Prizm

Checking Procedure: Prizm

NOTE: Ride height specifications for 1998 Prizm are not available.
  1. Lift front bumper 1.5" (38 mm) and let settle. Repeat 2 more times. Push front bumper down 1.5" (38 mm) and let settle. Repeat 2 more times. Measure dimension "Z" between center of lower control arm mounting bolt and floor. See Figure. See RIDE HEIGHT SPECIFICATIONS (1999 Prizm)  table.
  2. Lift rear bumper 1.5" (38 mm) and let settle. Repeat 2 more times. Push rear bumper down 1.5" (38 mm) and let settle. Repeat 2 more times. Measure dimension "D" between center of rear trailing arm bolt and floor. See Figure. See RIDE HEIGHT SPECIFICATIONS (1999 Prizm)  table.
scientia non olet · About LEMON Manuals