LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1169 (Object Detection System) >> Diagnostic Information and Procedures >> Information Center Telltale Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, observe the scan tool Sensor Voltage Feed Output parameter. The reading should be between 8.0-9.0 volts.
  2. Perform the LED Test, using the scan tool. Observe the operation of the three LEDs. All three LEDs should illuminate.
    • If the system does not perform as specified, refer to Rear Parking Assist Malfunction in Circuit/System Testing .
  3. Observe scan tool Park Assist System Status parameter, while commanding the rear parking assist disable switch ON and OFF. The scan tool parameter should change between Enable and Disable.
    • If the system does not perform as specified, refer to Rear Parking Assist Disable Switch Malfunction in Circuit/System Testing .
scientia non olet · About LEMON Manuals