LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Brake Booster Inlet Hose Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Power Brake Booster Inlet Hose
    GM650858Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Power Steering Hose Disconnected Notice .
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the engine protection shield. Refer to Engine Shield Replacement .
  3. Install a drain pan under the vehicle.
  4. Remove the brake booster inlet hose from the power steering pump (3).
  5. Lower the vehicle.
  6. Remove the brake booster inlet hose (1) from the brake booster (2).
  7. Remove the brake booster inlet hose from the vehicle.
scientia non olet · About LEMON Manuals