Adjustable Pedals Inoperative (with Memory)
Adjustable Pedals Inoperative (with Memory)
| Step |
Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Adjustable Pedal Schematics Connector End View Reference: Adjustable Pedal Connector End Views DEFINITION: All of the seat adjuster motors are inoperative, the lumbar and bolster motors may also be inoperative. |
|||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle |
| 2 | Verify the fault is present. Does the system operate normally? |
Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
| 3 |
|
Go to Step 7 | Go to Step 4 |
| 4 | Operate the adjuster switch in both directions. Does the scan tool display the correct switch status parameters in relation to the actual switch positions? |
Go to Step 9 | Go to Step 5 |
| 5 |
|
Go to Step 8 | Go to Step 6 |
| 6 | Test the switch supply voltage circuit for an open or high resistance. Refer to Circuit Testing
and to Wiring Repairs
. Did you find and correct the condition? |
Go to Step 12 | Go to Step 9 |
| 7 |
|
Go to Step 12 | Go to Step 9 |
| 8 | Inspect for poor connections at the adjuster switch connector. Refer to Testing for Intermittent Conditions and Poor Connections
and to Connector Repairs
. Did you find and correct the condition? |
Go to Step 12 | Go to Step 10 |
| 9 | Inspect for poor connections at the driver position module connectors. Refer to Testing for Intermittent Conditions and Poor Connections
and to Connector Repairs
. Did you find and correct the condition? |
Go to Step 12 | Go to Step 11 |
| 10 | Replace the adjustable pedal switch. Is the repair complete? |
Go to Step 12 | - |
| 11 | Replace the driver position module. Refer to Control Module References
for replacement, setup, and programming. Is the repair complete? |
Go to Step 12 | - |
| 12 | Operate the system to verify the repair. Did you correct the condition? |
System OK | Go to Step 3 |