LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> DeVille Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Ignition Systems >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

  1. Locate the Crankshaft Position (CKP) sensor to be removed. See Figure. Raise and support the vehicle. Remove the air deflector, if necessary.
  2. Disconnect the engine oil cooler pipe fittings from the engine oil filter adapter, if equipped. Disconnect the electrical connector from the engine oil pressure switch. Remove the oil filter. Remove the 2 oil filter adapter mounting bolts. Remove the oil filter adapter and discard the "O" rings. Remove the CKP sensor electrical connector. Remove the CKP sensor retaining bolt. Remove the CKP sensor.
scientia non olet · About LEMON Manuals