Bevel Box, Installing

Procedure 

Install in the reverse order of removal while noting the following:

-- Tighten the bevel box on the transmission.

-- Check the gear oil level. Refer to GEAR OIL, CHECKING LEVEL .

Tightening Specifications

• Refer to BEVEL BOX, TIGHTENING SPECIFICATION 
• Refer to OVERVIEW - ASSEMBLY MOUNTS
• Refer to OVERVIEW - DRIVE AXLE .
• Refer to DRIVE AXLE HEAT SHIELD, REMOVING AND INSTALLING .
• Refer to OVERVIEW - LOWER CONTROL ARM AND BALL JOINT .
• Refer to OVERVIEW - DRIVESHAFT .
• Refer to OVERVIEW - NOISE INSULATION .