DTC 114: Yaw Rate-Lateral Acceleration Sensor Installation Problem
- Turn the ignition switch ON (II).
- Clear the DTC with the HDS.
- Turn the ignition switch to LOCK (0), then turn it ON (II) again.
- Check for DTCs with the HDS.
Is DTC 114 indicated?
YES - Replace the yaw rate-lateral acceleration sensor (see YAW RATE-LATERAL ACCELERATION SENSOR REPLACEMENT ).
NO - Intermittent failure, the system is OK at this time. Check for loose terminals at the yaw rate-lateral acceleration sensor 4P connector. Refer to intermittent failures troubleshooting (see INTERMITTENT FAILURES ).