Steering Column Inspection: Inspection

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the steering column (see STEERING COLUMN REMOVAL AND INSTALLATION )
Do these checks
- Check for loose bearing mounting nuts (A) If they are loose, replace the column as an assembly
- Check the steering column ball bearings (B) and the steering joints (C) for play and proper movement If any bearing is noisy or has excessive play, replace the steering column as an assembly
- Check the sliding capsules (D) for distortion or breakage If there is distortion or breakage, replace the steering column as an assembly
- Check the tilt mechanism and telescopic mechanism for movement and damage
  
  Fig 1: Identifying Bearing Mounting Nuts, Steering Column Ball Bearings And Steering Joints
  Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the steering column (see INSTALLATION )