LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (TPMS (Tire Pressure Monitoring System)) >> Initiator Replacement >> Rear

Initiator Replacement: Rear

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Raise the rear of the vehicle, and support it with safety stands in the proper locations (see LIFT AND SUPPORT POINTS ).
  3. Remove the rear wheel.
  4. Remove the rear inner fender (see REAR INNER FENDER REPLACEMENT ).
  5. Disconnect the initiator connector (A).
    Fig 1: Initiator Connector With Bolt With Torque Specifications
    G05461766Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Remove the initiator (B) from the inner side of the wheel well.
  7. Install the initiator in the reverse order of removal.
scientia non olet · About LEMON Manuals