LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RDX >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System >> Navigation Display Unit Removal/Installation

Navigation Display Unit Removal/Installation

NOTE: Put on gloves to protect your hands. Take care not to scratch the dashboard.
  1. Remove the center panel (see CENTER PANEL REMOVAL/INSTALLATION ).
  2. Remove the screws, then pull out the navigation display unit (A).
    Fig 1: Identifying Navigation Display Unit And Connector
    G05446659Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the connector (B) and remove the navigation display unit.
  4. Install the unit in the reverse order of removal.
scientia non olet · About LEMON Manuals