Center Panel Removal/Installation

Special Tools Required

KTC trim tool set SOJATP2014 *

* Available through the American Honda Tool and Equipment Program; call 888-424-6857

NOTE:

Put on gloves to protect your hands.
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
Take care not to scratch the dashboard, and related parts.

Remove these items:
- Right driver's dashboard panel (see PASSENGER'S DASHBOARD TRIM PANEL REMOVAL/INSTALLATION )
- Passenger's dashboard trim panel (see PASSENGER'S DASHBOARD TRIM PANEL REMOVAL/INSTALLATION )
- Center panel trim (see CENTER PANEL TRIM REMOVAL/INSTALLATION )
Remove the center panel (A).
- Remove the screws (B).
- Gently pull out the panel to release the clips (C, D), then remove the panel.
- Disconnect the climate switch connectors (E), hazard warning switch connector (F) and audio switch connectors (G).
Fig 1: Identifying Instrument Panel And Clips
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the panel in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.
- Make sure the connectors are plugged in properly.