Starter Removal and Installation: Installation
- Install the starter (A) using a new gasket (B), then install the harness clamp (C), and positive starter cable (D) and S terminal connector (E). Make sure the crimped side of the B terminal is facing out, away from the starter.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install the battery base and battery (See step 62 on
ENGINE INSTALLATION
.
- Install the air cleaner assembly (see
AIR CLEANER ELEMENT INSPECTION/ REPLACEMENT
).
- Do the battery terminal reconnection procedure (See
RECONNECTION
).
- Start the engine to make sure the starter works properly.