LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1996 >> 3.5RL >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Multiplex Control System >> System Tests >> Self-Diagnostic Mode 1 Tests >> Retrieving Diagnostic Trouble Codes (DTCs)

Retrieving Diagnostic Trouble Codes (DTCs)

  1. Locate multiplex control system Green 2-pin SCS service connector, behind left kick panel. See Figure . Turn ignition switch to OFF position for at least 10 seconds. Connect SCS Service Connector Tool (07PAZ-0010100) to SCS service connector for at least 5 seconds.
  2. If ignition switch key light and buzzer do not come on, system is okay and no DTCs are stored. If DTC is stored, ignition switch key light will flash and buzzer will simultaneously sound within one second, indicating a DTC. Indicated DTC will repeat every 3 seconds.
  3. If DTCs are indicated, go to appropriate diagnostic test procedure. See DTC TEST DIRECTORY  table under DIAGNOSTIC TESTS. If no DTCs are indicated, go to WAKE-UP FUNCTION TESTING  . If no DTCs are indicated, and ignition switch key light and/or buzzer are malfunctioning, go to IGNITION SWITCH KEY LIGHT & BUZZER CIRCUIT TEST.
scientia non olet · About LEMON Manuals