Induction Pipe [2021-2022, B420T]: Removal

NOTE:

Removal steps in this procedure may contain installation details.

Drain cooling system, draining, filling, and bleeding. Refer to: COOLING SYSTEM - DRAINING, CHARGING AND BLEEDING

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

WARNING:

Be prepared to collect escaping fluid.

Release the locks.

Undo the hoses from the connections.

Courtesy of VOLVO CARS CORPORATION

WARNING:

Be prepared to collect escaping fluid.

Remove the screws.

Release the lock.

Undo the hose from the connection.

Fold marked part aside.

Courtesy of VOLVO CARS CORPORATION

Disconnect the connector.

Remove the cable harness clips.

Remove the air filter housing. Refer to: AIR CLEANER HOUSING

Courtesy of VOLVO CARS CORPORATION

Disconnect the connector.

Remove the screw.

Loosen the hose clamps.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Courtesy of VOLVO CARS CORPORATION

Release the lock.

Courtesy of VOLVO CARS CORPORATION

Release the lock.

Courtesy of VOLVO CARS CORPORATION

Loosen the clip.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Release the lock.

Undo the hose from the connection.

Disconnect the connectors.

Remove the cable harness clips.

Courtesy of VOLVO CARS CORPORATION

Remove the cable harness clips.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Remove the marked part.

Torque: Throttle body, 7 Nm

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque: M6, 10 Nm

Courtesy of VOLVO CARS CORPORATION

Remove the cable harness clips.

Remove the screws.

Torque: M6, 10 Nm

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque: M6, 10 Nm

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Torque: M6, 10 Nm

Courtesy of VOLVO CARS CORPORATION

NOTE:

Use new seals.

Remove the marked part.