Component Test

NOTE:

It is assumed that wires and connectors related to the component are checked and fault free.

If the brake lights do not work:

Use the activation parameter in VIDA to activate and deactivate the brake lights. When the component is faulty, the lamp will not light.

If the hazard warning lights do not work:

Use the activation parameter in VIDA to activate and deactivate the hazard warning lights. When the component is faulty, the lamp will not light.

If the position lights do not work:

Use the activation parameter in VIDA to activate and deactivate the position lights. When the component is faulty, the lamp will not light.

If the fog lights do not work:

Use the activation parameter in VIDA to activate and deactivate the fog lights. When the component is faulty, the lamp will not light.

If the reversing light does not work:

Use the activation parameter in VIDA to activate and deactivate the reversing light. When the component is faulty, the lamp will not light.

Select one of the four buttons at the bottom to finish.