Joining Cables: Installation
See information about junction sleeve. Refer to: JUNCTION SLEEVE
Special Tool: 951 2620 Stripping tool
Special Tool: 951 2785 Crimping tool
CAUTION:
Make sure that the surrounding components are protected from heat.
Special Tool: 951 2777 Hot-air gun Special Tool: 951 2850 Hot air gun Special Tool: 951 2851 Hot-air gun
CAUTION:
Ensure that the joint sleeve is properly shrunk around the wire. You should be able to see that glue has penetrated.
Place the splices evenly distributed.
Use: Electrical tape,
VEHICLES WITH FLEXRAY NETWORK
CAUTION:
Make sure that all openings are sealed.
CAUTION:
Ensure that the cable's untwisted length does not exceed 10 mm.
Use: Electrical tape,