Removal And Installation
REMOVAL
Removal steps in this procedure may contain installation details.
Battery, disconnection. Refer to: BATTERY DISCONNECTING AND CONNECTING
Drain the fuel tank. Refer to: FUEL TANK DRAINING
Follow instructions for lifting points body frame. Refer to: JACKING POINTS BODY
Remove the fasteners.
Remove the marked part.
Undo the hoses from the connections.
Undo the hoses from the connections.
HINT: The number of components indicated in the graphic may vary depending on the vehicle's equipment level or for other reasons.
Loosen the clip.
Loosen the hose clamps.
Fuel may still be present in the fuel tank after draining.
Loosen the component indicated. Do not remove it.
Undo the hose from the connection.
Release the lock.
Depress the locking device.
Undo the hose from the connection.
VEHICLES WITH PUMP, LEAKAGE DETECTION
Undo the hose from the connection.
ALL VEHICLES
Loosen the clips.
Fuel may still be present in the fuel tank after draining.
Remove the screws.
Loosen the component indicated. Do not remove it.
Torque: Fuel tank to body, 30Nm
HINT: The number of components indicated in the graphic may vary depending on the vehicle's equipment level or for other reasons.
Only use moderate force.
This step requires the aid of another technician.
Turn until resistance is felt.
HINT: The number of components indicated in the graphic may vary depending on the vehicle's equipment level or for other reasons.
ORIENTATION VIEW
HINT: The number of components indicated in the graphic may vary depending on the vehicle's equipment level or for other reasons.
The component is located on the top.
Loosen the clips.
Loosen the marked details.
Only use moderate force.
This step requires the aid of another technician.
Turn until resistance is felt.
HINT: The number of components indicated in the graphic may vary depending on the vehicle's equipment level or for other reasons.
Loosen the component indicated. Do not remove it.
Disconnect the connector.
Remove the marked part.
INSTALLATION
To install, reverse the removal procedure.
Order and download the appropriate software according to: VIDA/Software/Hardware Changes