Removal And Installation

REMOVAL

NOTE:

Removal steps in this procedure may contain installation details.

ALL VEHICLES

Perform battery disconnecting and connecting. Refer to: [BATTERY DISCONNECTING AND CONNECTING]

Remove steering wheel. Refer to: [STEERING WHEEL]

Remove panel steering column. Refer to: [PANEL STEERING COLUMN]

Remove instrument panel lower. Refer to: [INSTRUMENT PANEL LOWER]

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Courtesy of VOLVO CARS CORPORATION

Disconnect the connectors.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the part carefully

MODEL S90, MANUFACTURED BEFORE CHASSIS NUMBER -11795. MODEL V90, MANUFACTURED BEFORE CHASSIS NUMBER -9341. MODEL V90CC MANUFACTURED BEFORE CHASSIS NUMBER -98

Courtesy of VOLVO CARS CORPORATION

WARNING:

The steering column may contain pyrotechnic components.

Disconnect the connector.

ALL VEHICLES

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque: steering column to steering gear (steering shaft joint), 24Nm

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Torque: M8, 24Nm

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Make sure that the sharp edge does not damage the surrounding component.

INSTALLATION

To install, reverse the removal procedure.

MODEL S90, MANUFACTURED BEFORE CHASSIS NUMBER -11795. MODEL V90, MANUFACTURED BEFORE CHASSIS NUMBER -9341. MODEL V90CC MANUFACTURED BEFORE CHASSIS NUMBER -98

Courtesy of VOLVO CARS CORPORATION

Fold marked part aside.

The part is not to be reused.

INSTALLATION

To install, reverse the removal procedure.

Order and download the appropriate software