Changing The Region Code In The DVD Device
WARNING: This page is about a different variant/trim than selected.
The region coding means that only discs that correspond with the set region in the DVD device can be played. Preselected region code is region code 1. The region code in the DVD device can be changed up to 5 times. After that, the set region is then locked and cannot be changed.
Region codes:
- USA, Canada, and Bermuda.
- Europe including Armenia, Georgia, Azerbaijan, Egypt, Iran, Japan, Lesotho, South Africa, Swaziland, French Guyana, and Greenland.
- South East Asia, Hong Kong, Macao, South Korea, and Taiwan.
- Australia, Oceania, Mexico, Central America, and South America (except French Guyana).
- Russia, South Asia (excluding Iran), India, Mongolia, North Korea, and Africa (excluding African countries mentioned above in region 2).
- China excluding Hong Kong and Macao.
NOTE:
Warranty repairs due to locked region on the DVD device will not be approved. Region code changes to the region in which the vehicle will be used can only to be done at the workshop. The security code is not to be given to the customer. Region code 0 is not used.
Do as follows to open the menu for region code change:
- Turn on the ignition.
- Activating the system for rear seat entertainment.NOTE:
There must not be a disc in the DVD player.
- Press DRIVER or PASSENGER on the remote control depending on which DVD device is to be coded.
- Point the remote control at the DVD device to be coded and press: 7, 7, 7 and then the Play button.
- Select the region code that applies to the relevant vehicle and press ENT .
- Use the RIGHT respectively LEFT arrow to select region. Then press ENT .
- Press STOP to exit the menu.
- Deactivating the system for rear seat entertainment.
Perform the same procedure for both the right and left screens separately.