Connecting The T Pipe

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS CORPORATION

Deactivate the function for STC/DSTC by pressing in the button for STC/DSTC for approximately 2 seconds
Ignition off
Connect the T-pipe see 9997002 with oil pressure gauge see 9995114 to the coolant hose from the transmission for the oil cooler
Raise the car so that the drive wheels are clear of the ground.
WARNING:
Ensure that the car safely raised. Ensure that there are no objects caught in the front wheels.
Start the engine
Gear selector in position P
Activate the function "Block automatic shifting".
Other information
- To connect the T-pipe to the oil cooler for the transmission. See T-PIPE, CONNECTION TO OIL COOLER .
Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
Courtesy of VOLVO CARS CORPORATION

Allow the engine to run.