LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2013 >> XC90 R-Design, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Brake Control Module (BCM) Diagnostic Trouble Codes - 2 Of 3 >> BCM-A031: Communication Between Control Modules. Steering Angle Sensor. Tolerance Check Not Run (2003-2004) >> Plausibility Check Not Run >> Checking Diagnostic Trouble Codes (DTCS)

Checking Diagnostic Trouble Codes (DTCS)

If diagnostic trouble code (DTC) BCM-A031 is stored on its own it must be erased.

If diagnostic trouble code (DTC) BCM-0111 is stored at the same time as BCM-A031, read off the diagnostic trouble codes (DTCs) from the control module for the steering angle sensor. Fault-trace the system.

Select an option:

  1. Diagnostic trouble code (DTC) BCM-A031 is stored on its own

    see ERASING DIAGNOSTIC TROUBLE CODES (DTCS) 

  2. Diagnostic trouble codes (DTCs) BCM-0111 and BCM-A031 are stored at the same time.

    OKAY:  Troubleshooting has been completed.

Fig 1: Identifying Steering Wheel Angle Sensor
GLL105336Courtesy of VOLVO CARS CORPORATION
scientia non olet · About LEMON Manuals