Checking The Wiring And Component

Check that the connectors between the switch for the cruise control and the contact reel are correctly connected.

Check the wiring between the contact reel and the switch for the cruise control. Check for an open-circuit.

Try a new contact reel.

Remedy as necessary.

Other information:

To access or replace the cruise control switch, see KEYPAD STEERING WHEEL, REPLACING
To replace the contact reel, see CONTACT REEL, REPLACEMENT
To access or replace the steering wheel module (SWM), see STEERING WHEEL MODULE (SWM), REPLACING
To connect the breakout box, see CONNECTING THE BREAKOUT BOX
For information about signals and connectors, see SIGNAL SPECIFICATION .

Fig 1: Identifying Ohm Meter

Courtesy of VOLVO CARS CORPORATION